VT Industries / Wood Veneer Architectural Wood Door

VT Industries / Wood Veneer Architectural Wood Doors provide a stylish wood appearance with an upscale European edge design. It's this attention to detail that sets us apart from our competition. When combined with our overall capabilities, product quality and extra standard features, it makes VT the obvious choice for your wood veneer door needs.

The VT Advantage
The commitment to quality starts with 5-ply construction and is followed by double hot press technology that provides a consistent, quality bond between all of the components. As a standard feature of the flush wood veneer doors, matching hardwood stile edges are provided at no extra cost. This application of matching hardwood edges, in combination with the European edge design, yields a beautiful, seamless flush wood veneer door. Beautiful and resilient doors are the result of a commitment to quality. Flush wood veneer doors withstand the 1 million cycle-slam test in accordance with the WDMA TM-7 standard. They also meet the 20-, 45-, 60-, and 90-minute positive pressure fire ratings. In addition to meeting these rigorous standards, we reinforce the doors' performance with a lifetime warranty. These doors are manufactured in a highly efficient, environmentally friendly facility. VT Industries Architectural Wood Doors are then only GREENGUARD^® Certified wood doors available. Additionally, they are also GREENGUARD^® Children & Schools^SM Indoor Air Quality Certified, available FSC-Certified as well as listed on greenspec^®.

Design

WDMA Premium Grade veneers are standard and selected for uniformity. Once you have selected a veneer species you can be assured that VT's factory finishes will furnish you with a consistent and durable finish for even the most high-traffic areas. Finish coats are applied with a WDMA TR-6 factory finish system that features a computer controlled automatic sprayer resulting in a flawless finish. Water-based stains and solvent-free sealers and topcoats eliminate volatile organic compound (VOC) emissions, which assist in healthier indoor air quality for building occupants. To ensure lasting performance, a UV curing system which adds a durable, protective shield to each flush wood veneer door.

a. Material: [Particleboard] [Agrifiber] [Structural composite lumber (SCL)] [Stave lumber].
b. Average Density: 28 pcf to 32 pcf.
c. Compliance: ANSI A208.1, Grade 1-LD-2.

a. Glue stiles and rails to core.
b. Sand entire assembly flat as a unit to ensure minimal telegraphing of core components through face veneers.

9. Composite Crossbands:
a. Apply to core before application of matching hardware stiles.
b. Exposed Crossbanding: Not allowed along stile edges.

10. Veneers:
a. Apply to crossbanded core in hot press using Type I, exterior, water-resistant adhesive.
b. 5-ply construction.

6. Rails:
a. [Structural composite lumber (SCL), 45-minute rated] [Noncombustible material, 60- and 90-minute rated].
b. Width: Manufacturer’s standard width.
7. Core:
a. Fire-retardant mineral board.
b. Weight: 30.8 pcf to 34.7 pcf.
c. Does not contain asbestos or added urea formaldehyde.

8. Composite Crossbands:
a. Apply to core before application of matching hardware stiles.
b. Exposed Crossbanding: Not allowed along stile edges.

PREPARATION
A. Allow doors to become acclimated to building temperature and relative humidity for a minimum of 24 hours before installation.

CLEANING
A. Clean doors promptly after installation in accordance with manufacturer’s instructions.
B. Do not use harsh cleaning materials or methods that could damage finish.

The VT Advantage

• Hot press technology provides consistent quality
• Matching hardwood stile edge as standard at no extra cost
• Matching hardwood edge applied after beveled core assembly results in seamless wood appearance
• European edge design eliminates unsightly crossbands
• Withstands the 1 million cycle-slam test (in accordance with WDMA T.M.-7)
• 5-ply construction
• Meets new positive pressure fire ratings: 20-, 45-, 60- and 90-minute

Design

• WDMA premium grade A as standard
• Selected for uniformity
• Popular species in stock for faster turnaround times
• Full range of domestic and exotic species available
• WDMA System TR-6 catalyzed polyurethane water-based factory finishing

How to specify

• Composite crossbands shall be applied to core prior to application of matching hardwood stiles.
• Exposed crossbanding is not allowed along stile edges.

GREENGUARD Indoor Air Quality Certified

GREENGUARD Children & Schools Certified


http://www.greenguard.org/ProductDetail.aspx?id=2574&t=0&b=1&a=24|0|0|0||||0|0|1|16|1

http://www.vtindustries.com/

+18008271615

Contact Manufacturer:

tpetersen@vtindustries.com

Combimix AB / LP Fiber 760

Combimix AB / LP Fiber 760

Description:

Combimix LP Fiber 760 is a premium quality calcium aluminate cement-based floor leveling underlayment that is reinforced with fiberglass filaments for added strength. LP Fiber 760 is rapid-drying, pourable or pumpable, and designed to dramatically reduce installation cost and application time on even the most demanding job sites.

GREENGUARD Indoor Air Quality Certified

http://www.greenguard.org/ProductDetail.aspx?id=9398&t=0&b=1,2&a=12|17|0|0||||0|0|1|16|1

http://www.combimix.se/

Contact Manufacturer:

jonas.lund@combimix.se

+46171466590

Osmose, Inc. / SUSTAIN(R) 20T

Osmose, Inc. / SUSTAIN(R) 20T


Greenguard description:

The environmentally friendly SUSTAIN(R) 20T wood preservative is a revolutionary, fully micronized, copper plus tebuconazole formulation that provides significant advantages over traditional preservatives such as MCQ (micronized copper quat), and ACQ (alkaline copper quat), and Copper Azole. SUSTAIN(R) preserved wood is protected against attack from fungal decay and termites, including Formosan termites, by the MCA(TM) wood preservative system. SUSTAIN(R) 20T is manufactured with minimal carbon footprint and provides retailers and consumers of SUSTAIN(R) preserved wood, the latest advancements in wood preservative technology.

Product Features
• NatureWood products are durable and designed for outdoor construction
• Copper-based preservative with a co-biocide
• The most effective and widely used alternative to traditional pressure treated wood
• Preservative system meets American Wood Preservers’ Association standards
• NatureWood products are Building Code Compliant and have been issued National Evaluation Report #628 by National Evaluation Services, Inc.

Finishing- Any exposed wood, pressure treated or not, should be protected from the weather. NatureWood products which do not contain a
factory applied water repellent (check the label) should have a clear water repellent applied immediately. A stain with water repellent can be
applied as soon as the wood is surface dry. NatureWood products which have a factory applied water repellent can have an oil based stain applied
in 30 to 60 days and water based stains can be applied after 6 months. In all instances follow the manufacturer's directions when applying water
repellents or stains which may contain water repellent.

NatureWood products are treated with an EPA registered preservative that is forced
into the wood under pressure to protect it from termites and fungal decay.



Deck board spacing- During construction, should the wood
become wet, butt deck boards together. As drying occurs, some shrinkage
can be expected. If the wood is dry, allowing for shrinkage is not necessary.

Other info:

• Warning- Certain metal products (including fasteners, hardware, and flashing) may
corrode when in direct contact with NatureWood products. To prevent premature
corrosion and failure it is important to follow the recommendations of the manufacturers
for all metal products.
• Do not burn preserved wood (see Disposal section).
• Wear a dust mask and goggles when cutting or sanding wood.
• Wear gloves when working with wood.
• Some preservative may migrate from the treated wood into soil/water or may dislodge
from the treated wood surface upon contact with skin. Wash exposed skin
areas thoroughly.
• All sawdust and construction debris should be cleaned up and disposed of
after construction.
• Wash work clothes separately from other household clothing before reuse.
• Preserved wood should not be used where it may come into direct or indirect contact
with drinking water, except for uses involving incidental contact such as fresh water
docks and bridges.
• Do not use preserved wood under circumstances where the preservative may become
a component of food, animal feed, or beehives.
• Do not use preserved wood as mulch.
• Only preserved wood that is visibly clean and free of surface residue should be used.
• Do not use preserved wood in direct contact with aluminum.
• If the wood is to be used in an interior application and becomes wet during
construction, it should be allowed to dry before being covered or enclosed.
If you desire to apply a paint, stain, clear water repellent, or other finish to your
preservative treated wood, we recommend following the manufacturer’s instructions
and label of the finishing product. Before you start, we recommend you apply the
finishing product to a small exposed test area before finishing the entire project to
insure it provides the intended result before proceeding.

Contact Manufacturer:

sandy.zeoli@pahc.com

+17702334200

http://www.osmosewood.com/naturewood/images/pdf-naturewood-productfacts.pdf

http://www.greenguard.org/ProductDetail.aspx?id=6402&t=0&b=1,2&a=12|17|0|0||||0|0|1|16|1

ABET LAMINATI / ABET High Pressure Laminate

ABET LAMINATI / ABET High Pressure Laminate

Metals are never recommended for horizontal surfaces where wear and traffic are an issue. In general, darker laminates show scratches more readily than lighter colors. Consider this when choosing a surface that experiences traffic.

Typical horizontal applications include work surfaces on counters, table tops, residential and commercial furniture, case goods, store fixtures, and work stations. Vertical applications include wall panels, cabinet walls, doors, toilet partitions, elevator cab interiors, front panels of workstations in hospitals, restaurants, retail stores, and airports. This grade also has the capability of
postforming to achieve radius edges for counters, desktops, and store fixtures.

Composition: ABET LAMINATI high pressure decorative laminate is manufactured by pressing melamine impregnated print and solid color surface sheets over a phenolic impregnated kraft paper core at pressures over 1000 psi and temperatures of approximately 300 degrees F (149 degrees C). The backs are sanded to facilitate bonding to a substrate.

Limitations: ABET LAMINATI high pressure decorative laminate is not recommended for exterior applications or for bonding to gypsum wallboard, plaster, concrete or plywood. This product is not a structural material and is to be used bonded to a suitable substrate. Do not use in areas with extreme humidity conditions or temperatures higher than 275 degrees F (135 degrees C) for extended periods of time. This product is not to be exposed to continuous, direct sunlight. Metalli laminates do not meet regular wear resistance requirements and should not be used in high wear areas.

High-pressure decorative laminates and substrates should be allowed to acclimate for at least 48 hours at
the same ambient conditions. Optimum conditions are approximately 23 degrees C (73 degrees F) and a
relative humidity of 45% to 55%.

Transport
· During handling operation, we recommend moving the panels with extreme care because sharp edges could scratch
the decoratives.

Finishes:
Sei A smooth textured finish with a moderate reflective value
Soft A smooth low sheen finish
Lucida A high gloss finish
Millerighe A horizontal line embossed finish
Millerighe-2 A horizontal line embossed finish
Fiber A fiber inclusion embossed finish
Mandarin A pebbled textured finish with moderate reflective value
Nutshell A woodgrain tick embossed pattern
Magma An embossed stone pattern
Muro An embossed pattern
Multirighe An embossed line pattern
Satinata A brushed metal pattern
Onda An embossed grooveMAINTENANCE AND CARE



Sheet Size: 51" (130 mm) x 120" (305 mm)
Thickness: 0.035" (0.9 mm)

ABET high pressure laminates have a hard, durable melamine surface and will maintain their attractive appearance longer than most other decorative surfacing materials and requires minimal maintenance. The decorative surface may be cleaned with warm water and a mild soap or detergent using a damp cloth or sponge. Difficult stains such as coffee or tea can be removed using a mild household cleaner/detergent and a soft bristle brush, repeating as necessary.
Do not use abrasive pads, scouring powders or cleansers as they may permanently dull or scratch the laminate surface making it susceptible to staining. Harsh chemicals such as oven cleaner, toilet cleaner, drain cleaner, and acids and alkalis chemicals will etch and discolor the decorative surfaced curve pattern.



Cost varies with quantity, pattern, finish and other factors.

usa@abetlaminati.com

+18002282238

http://www.abetlaminati.com/techData/pdf/New-ABET-LAMINATI-Technical-Data-Horizontal-Postforming-0.9mm-R-110.pdf

http://www.abetlaminati.com/ProductDetail.aspx?SKU=744METDECOR

http://www.greenguard.org/ProductDetail.aspx?id=6617&t=0&b=1&a=16|0|0|0||||0|0|1|16|1

Accelerated Building Technologies, LLC / accel-E™ Steel Thermal Efficient Panel

Accelerated Building Technologies, LLC / accel-E™ Steel Thermal Efficient Panel

Description:

The accel-E™ Steel Thermal Efficient Panel (S.T.E.P.) from ACCELERATED Building Technologies is a thermally resistant, high performance building panel that’s strong, light in weight and energy efficient. Combining the strength and performance of cold-formed steel framing with the superior insulation properties of expanded polystyrene, the accel-E™ STEP wall system simplifies framing, insulation and sheathing to one process.

GREENGUARD Indoor Air Quality Certified

GREENGUARD Children & Schools Certified

http://www.greenguard.org/ProductDetail.aspx?id=9757&t=0&b=5&a=0|0|0|0|LEED%20for%20Homes|||0|0|1|16|1

Contact Manufacturer:

info@accel-E.com

AkzoNobel / Devoe Paint® Wonder-Pure® Interior Eggshell

AkzoNobel / Devoe Paint® Wonder-Pure® Interior Eggshell

Description:

Devoe Paint Wonder-Pure is our premium quality, no-VOC (volatile organic compounds) wall paint. Wonder-Pure is specially formulated to be environmentally friendly, free of odor and less likely to cause allergic sensitivity. With superior performance, Wonder-Pure provides a durable, long-lasting, beautiful finish. Excellent coverage and application properties when applied by brush, roller or spray. Fast dry and no-odor makes this product ideal for occupied environments, allowing immediate return to service. Wonder-Pure also offers a full color range. Backed by third-party certifications, Wonder-Pure is ideal for homes, schools, hospitals, hotels and offices.

Features

• Offers superb touch-up ability.
• Easy soap and water clean-up.
• Available in durable flat, eggshell and semi-gloss finishes.

1. Minimizes downtime

   Owners will be back in business sooner because it has no lingering chemical odor to irritate their customers, patients or loved ones.

2. Saves you time

   Easily applied by brush, roller or spray, it delivers fast hiding.

3. Reduces risk

   A safer, fumeless product for you to paint with, it provides owners with cleaner air inside their homes/facilities and meets LEED (Leadership in Energy and Environmental Design) criteria and is GREENGUARD certified.

4. Builds your reputation

   Using this specialized, premium product demonstrates your knowledge of the latest in environmental technologies, which allows you to charge a higher price.

Recommended Applications

The Freshaire Choice paint helps keep the air in your clients' homes cleaner and healthier for their families/customers — while making every room more beautiful. With absolutely no VOCs it's virtually odorless, which means no more irritating fumes while you paint. And because it's fast drying and simple to clean up, they can even entertain guests or get back to work the same day you paint.

The Freshaire Choice paint is perfect for use in a variety of locations

• Schools, cafeterias, and child care facilities — because it's GREENGUARD indoor air quality certified for Children and Schools
• Hospitals and nursing homes
• Restaurants
• Hotels
• Commercial buildings
• Nurseries and children's rooms
• Anywhere owners are concerned with indoor air quality and green design

GREENGUARD Indoor Air Quality Certified

GREENGUARD Children & Schools Certified


http://www.greenguard.org/ProductDetail.aspx?id=5741&t=0&b=5&a=0|0|0|0|Green%20Globes|||0|0|1|16|1

http://www.thefreshairechoice.com/Contractors.html#ProdDescription
Contact Manufacturer:

duluxpaints@ici.com

Manufacturer Website:

Http://www.thefreshairechoice.com
+18668800304

Alcan Composites USA, Inc. / Gator-Ply® - Green Gator-Backer™

Alcan Composites USA, Inc. / Gator-Ply® - Green Gator-Backer™

Description:

Low emitting man-made resin impregnated backer for office, residential, or school, cabinet and display furniture industry.

Flammability Characteristics

• Combustible

Recommended Applications

P-O-P Displays Medium-term application life
Exhibits & Kiosks Medium-term application life
Framing Long-term application life
Signage - Interior Medium-term application life
Signage - Exterior Medium-term application life

GREENGUARD Indoor Air Quality Certified


Contact Manufacturer:

doug.robinson@alcan.com

Http://www.alcancompositesusa.com/

http://www.greenguard.org/ProductDetail.aspx?id=7765&t=0&b=1&a=16|0|0|0||||0|0|1|16|1

Veritas / Veritas ResinArt Panels

Veritas / Veritas ResinArt Panels

Description:

Veritas panels are available in limitless colors, textures and encapsulated interlayers. Panels are class "A" fire rated up to 1/4", contain high recycled content, offer supperior impact strength and chemical resistant.

Veritas ResinArt Panels feature pure and flowing color throughout the resin, avoiding a fabric-like grain and quality. Because the pigments are custom mixed, you can choose from a rich offering of current, classics, tinted neutrals and forecasted shades that permit varying degrees of opacity and translucency. All colors can be combined with textiles, botanicals and other materials for exceptional versatility.

This product has been certified according to the
GREENGUARD Children & Schools Certification
Program for Low Emitting Products


sales@veritasideas.com

http://www.veritasideas.com/ResinArtPanels.aspx

http://www.greenguard.org/ProductDetail.aspx?id=3998&t=0&b=1,2&a=12|83|0|0||||0|0|1|16|1

http://www.veritasideas.com/Documents/VeritasCSI_000.pdf

Dolce Italia / Sasso Romano

Dolce Italia / Sasso Romano

Description:

Sasso Romano Collection includes three brilliant and modern colors, bright and ardent nuances for an intense and evocative result. It is available in the sizes 18"x18", 12"x12", 6"x6" and 3"x6" complemented by a 2.4"x2.4" and a 1"x2" mosaic.

GREENGUARD Children & Schools Certified

GREENGUARD Indoor Air Quality Certified

901651201

info@stonepeakceramics.com

Brazilian Oak Plank

Brazilian Oak Plank

+18648336250

dunderwood@andersonfloors.com

http://www.greenguard.org/ProductDetail.aspx?id=6775&t=0&b=1&a=1|0|0|0||||0|0|1|16|1

http://www.andersonfloors.com/flooring.aspx?collection=109

Acousti‑Mat

Acousti‑Mat

Product Description:

A breakthrough in sound control technology, Acousti‑Mat^® II is the cost-effective solution to "noise" complaints, even with ceramic and wood floors. Its core of fused entangle filaments, attached to a non-woven fabric, creates a void area between the subfloor and a high-strength Maxxon^® underlayment.

The low 1/4" profile of Acousti-Mat II allows a thinner floating floor composite and is a cost-effective choice for both new floors and retrofit where floor height is a concern. It increases IIC levels up to 10 points over wood frame, and up to 20 points over concrete. It also increases the STC rating 6-15 points over a bare wood frame system.

Acousti-Mat II is always "Green" with 40% pre-consumer recycled content. It also has water resistant fabric.

Technical Data:

Material Composition:	Nylon
Thickness:	1/4" (6 mm)
Density:	6.3 pcf (100.8 kg/m³)
Acousti-Mat II Color:	black with white fabric · water resistant fabric
Flammability ASTM E-84	Fuel Contribution: 0 Smoke density: NFPA Class A Flame Spread: NFPA Class A
Deflection:
Pressure 500 psf (2440 kg/m²) 1000 psf (4880 kg/m²) 2000 psf (9760 kg/m²) 4000 psf (19520 kg/m²)	Deflection 0.06" (1.52 mm) 0.08" (2.03 mm) 0.15" (3.81 mm) 0.20" (5.08 mm)
Underlayment Depth:	1" (25 mm)
Underlayment Depth with Maxxon CSM:	3/4" (19 mm)

'Green' Information:

Sample USGBC LEED Credit Areas*
Project	Credit	Category	How Requirement is Fulfilled
Materials & Resources	MR 4	Recycled Content	Nylon, 40% Pre-Consumer
	MR 5	Local/Reg. Materials	Enka, NC 28728

* Credits may vary depending on project type and Maxxon products used.

http://www.maxxon.com/acousti-mat_ii/data

Therma-Floor

Product Description:

Therma-Floor^® is a gypsum underlayment designed to pour over hot water tubes or electric heating cables. It acts as the thermal mass for any radiant floor system. Therma-Floor encases the tubes or cables in crack resistant, noncombustible gypsum. Its special formula resists breakdown to 150ºF (66ºC). And because it's poured only 1-1/4" (32 mm) thick, the heating system is more responsive and more comfortable.

Now always a "green" building material, Therma-Floor is an ideal solution for sustainable building projects.

Technical Data:

Compressive Strength:	Typical range of 2,000 to 3,000 psi (14 to 21 MPa)
'K' Factor:	4.96 Btu/(h­ · ft² · °F) (.7142 W/[m · °C])
Specific Heat:	.224 Btu/(lb · ºF) at 85ºF (.9385 kJ[kg · ºC] at 29.44ºC)
Weight:	At 1-1/4", less than 12 lbs./sq.ft. (At 32 mm, less than 58.7 kg/m²)
Dry Density:	115 lbs./ft³ (1840 kg/m³)
Point Loading:	Typical loading of up to 2,500 pounds (1134 kg) on a 1" (25 mm) diameter disc
Thermal Resistance at 1" Thickness:	R-0.208
Surface Burning Characteristics:	Flame spread: 0 Fuel contributed: 0 Smoke density: 0
VOC:	GREENGUARD Children & Schools Certified

'Green' Information:

Sample USGBC LEED Credit Areas*
Project	Credit	Category	How Requirement is Fulfilled
Indoor Environmental Quality	IEQ 3.2	Air Quality Before Occupancy	GREENGUARD Certified (Field testing MUST be completed prior to claiming credit)
	IEQ 4.3	Low Emitting Materials: Floor System	GREENGUARD Children & Schools Certified
Materials & Resources	MR 2.1-2.2	Construction Waste Management	Recyclable packaging and shipping materials
	MR 4	Recycled Content	Fly Ash
	MR 5	Local/Regional Materials	Manufactured in Blue Rapids, KS 66411; Las Vegas, NV 89035; Camden, NJ 08103; Job site manufactured with local sand & water
Innovation & Design	ID 1	Sound Control	Enhanced living environment

Therma-Floor is GREENGUARD Indoor Air Quality and Children & Schools Certified

Maxxon® Corporation
920 Hamel Road

P.O. Box 253
Hamel, MN 55340
Phone: (763) 478-9600 (763) 478-9600
Toll Free: (800) 356-7887 (800) 356-7887
Fax: (763) 478-2431
E-Mail: info@maxxon.com

http://www.maxxon.com/company/about_us#greenmark

http://www.greenguard.org/ProductDetail.aspx?id=7537&t=0&b=1&a=12|0|0|0||||0|0|5|16|1

Trend Q Floor Stone Source

Trend Q

Description

Trend Q is a series of terrazzo-like engineered stone tiles and slabs that include numerous colors with recycled glass content. The material is composed of approximately 93% "grit" or chips and 7% pigmented polyester resin. The grit, which is comprised of either quartz, granite, glass, or mosaic, is crushed into nine different granule sizes. These granules are mixed with the pigmented polyester resin and spread on a large sheet mold where the slab takes its shape. After finishing the surface to a high polish, the slab is fitted with a mesh backing and is either left intact or cut into tiles.

Colors + Finishes

There are 49 colors in the Trend Q standard color line. Due to the nature of the product, finishes vary from color to color but typically range from a high-polish to a semi-polished surface.

Sizes

Standard nominal (and actual) sizes are: 12"x12" (11.75"x11.75"), 24"x24" (23.5"x23.5"), and 16"x47" (15.75"x47.25").

Recycled Content

In response to the evolving global perspective towards environmentally friendly construction, many new and re-mastered colors in Trend Q contain measured amounts of either post-consumer or post-industrial recycled materials.

Fifteen colors contain various percentages of post-consumer recycled content, and twenty contain 70% post-industrial recycled material. Fourteen colors are made by more traditional means. The percentage of recycled content for each color is noted in the product captions.

Applications

Trend Q is highly durable, easy to maintain, stain resistant and slip resistant (based on ASTM C1028 test results). Tiles are suitable for interior and exterior walls and floors, including heavy-traffic commercial flooring applications.

Installation + Maintenance

Tiles can be installed using standard installation methods for thinset adhesives. Use high quality adhesive and grout from manufacturers such as Laticrete and Mapei, following manufacturers' recommendations, depending on conditions. Clean with a neutral detergent when needed.

http://www.stonesource.com/docs/trend-q.pdf

http://www.stonesource.com/products/trend/q.html

New York
215 Park Avenue South
New York, NY 10003
phone: 212 979-6400 212 979-6400 212 979-6400 fax: 212 979-6989

info@stonesource.com

Celador Quartz Stone Source

Celador Quartz

Description

Celador is a quartz based agglomerate, cast into tiles and slabs. Celador is highly durable and is suitable for many residential and commercial interior applications.

Sizes

Standard nominal tiles sizes are 12"x12", 12"x24", 16"x16" and 24"x24". Slabs are 55"x118" (3/4" or 1 1/4"). Other sizes are available, including cut-to-size. Our stock inventory includes 24"x24" tiles and 55"x118" (1-1/4") slabs.

Colors + Finishes

There are four colors in the Celador Series. All colors come standard in a polished finish.

The Celador color line includes solid colors with quartz particles. Custom Colors require a minimum of approximately 6,500 square feet of tile or 3,000 square feet of slabs. For additional information about color availability and minimum quantity requirements, please contact your local Stone Source representative.

Applications

Celador is extremely hard and dense and has practically no porosity. It will not react to acid, making Celador an excellent material for residential and commercial floors, counters, interior and exterior cladding and other uses. As a floor tile, it will withstand wear, even on heavy traffic commercial floors, resist staining and requires low maintenance. Celador is suitable for kitchen counters and other working surfaces due to its hardness, low porosity, resistance to stains and acids, lack of hairline cracks and will not support bacteria growth.

Installation

For floor tiles up to 24"x24", the substrate must be flat, stable, solid, free of cracks, smooth, dry and clean. Use Laticrete 333 Super Flexible Additive with Laticrete 317 Floor 'N Wall Thin Set Mortar, or approved equal. Apply adhesive to the full back of each tile. Tap tiles with a rubber mallet to ensure even laying. Recommended grout width, up to 16"x16" is 1/16" and 1/8" grout width for larger tiles, using Laticrete 1600 Series sanded grout. For other applications, contact your Stone Source representative or Laticrete for recommended materials and installation methods.

Maintenance

Remove dirt and liquids as soon as possible. Clean and buff regularly with a neutral detergent. For polished finish, clean and buff regularly with a neutral detergent. Honed finish Celador requires additional maintenance than the polished finish. For honed finish tiles, cleaners such as KlenzAll by Stone Tech Professional may be effective, depending on the application. Using a floor machine, scrub with a 3M No. 3500 natural tan pad. Remove substance with a wet vac to eliminate dirt effectively.

Colors

Super White

White

Beige

Brown

http://www.stonesource.com/products/celador/index.html

New York
215 Park Avenue South
New York, NY 10003
phone: 212 979-6400 212 979-6400 fax: 212 979-6989

info@stonesource.com

Amorim Cork

Amorim Cork


Cork oak forests cover approximately 2.5 million hectares across the Mediterranean region and most of them are located in seven countries: Portugal, Algeria, Spain, Morocco, France, Italy and Tunisia.

Amorim’s Cork flooring represents a unique balance between the creation of wealth and the protection of the environment. The Cork industry is remarkably sustainable; it takes a natural raw material extracted cyclically from Cork trees without ever harming them, and turns it into high value-added products while promoting the economic and social sustainability of areas at risk of desertification. Corklife Studiostyle Supertop is one of the most well balanced solutions between quality and price that you can find. Comfortable, sound insulator, durable and affordable with a very attractive visuals selection, this product line offers you a true warm feeling, straight from nature.

Cork properties

The bark of the cork oak tree has a unique honeycomb structure composed of tiny cells. Each cell has the form of a 14-sided polyhedron and the inner cell space is entirely filled with an air-like gaseous mixture. The properties of cork derive naturally from the structure and chemical composition of its extremely strong, flexible cell membranes, which are waterproof and airtight.
Because about 89% of the tissue of the bark consists of gaseous matter, the density of cork is extremely low, in the order of 0.12 to 0.20, a fact that bears witness to the huge disproportion between the volume and the weight of the material.

Lightness:
Cork is light and floats on water. For many thousands of years, this has been its most evident and most celebrated characteristic. Since ancient times, cork has been used in fishing equipment.

Elasticity and Resiliency:
The cell membranes of cork are highly flexible, making it both compressible and elastic. This means it returns to its original shape after being subjected to pressure. This and other characteristics explain why cork has become an indispensable material for making bottle stoppers.
These physical qualities mean that cork can be fitted perfectly against the walls of the bottleneck. When cork is subjected to strong pressure, the gas in the cells is compressed and considerably reduced in volume. When the pressure is released, the cork immediately recovers its original shape and volume, showing no trace of having been subjected to any appreciable deformation.

Impermeability:
The presence of suberin (a complex mixture of fatty acids and heavy organic alcohol) renders cork impermeable to both liquids and gases. As a result, it does not rot, making it one of the best seals available.

Insulation and fire retardant qualities:
The value of cork is further enhanced by its low conductivity of heat, sound and vibration. This is because the gaseous elements it contains are sealed in tiny, impermeable compartments, insulated from each other by a moisture-resistant material. This endows cork with one of the best insulating capacities, both thermal and acoustic, of any natural substance.
Cork is also a natural fire retardant: it neither spreads flames nor releases toxic gases during combustion.

Resistance to wear:
Cork is remarkably resistant to wear and has a high friction coefficient. Thanks to its honeycomb structure, it is less affected by impact or friction than other hard surfaces.

Hypoallergenic properties:
Because cork does not absorb dust, it helps protect against allergies and does not pose a risk to asthma sufferers. It also has an unchangeable constitution that guarantees efficiency.

Maintenance:
Mild detergent and a vacuum cleaner. For daily/weekly maintenance, you can also use a broom handle with a cloth on the end. The removable cloth has a substance with anti-static characteristics, which will clean all the dust and prevent its settling on the floor.



AMORIM REVESTIMENTOS, S.A. - HEADQUARTERS
Rua do Ribeirinho, 202
Apartado 13
4536 - 907 S.Paio Oleiros
PORTUGAL
Tel: + 22 747 5600
Fax: + 22 747 5601
E-mail: geral.ar@amorim.com

GREENGUARD Indoor Air Quality Certified

Contact Manufacturer:

mpedro.ar@amorim.com

Manufacturer Website:

http://worldwide.wicanders.com/brochuras/Wicanders_GB_Cork_FINAL.pdf

Http://www.wicanders.com

http://www.facebook.com/wicanders

Amazon Select Recycled Latex Paint

Amazon Select Recycled Latex Paint


Good quality, reusable paints are hand sorted by color for processing into recycled content paint.

Reusable paints of the same color are pumped into a tank and mixed with a high-speed mixer.

The paint is tested for viscosity, color, sheen, coverage, pH and other characteristics. The paint is then adjusted with additives as necessary to meet our strict specifications. Finally, the paint is filtered and packaged for sale.

paint is periodically tested by the paint industry's premier independent organization, the Master Painters Institute. Amazon Select is certified by Green Seal as a quality, recycled content, environmentally preferable product.

Amazon Select refund the purchase price of any paints returned to us within one year of shipment, no questions asked.

Non-reusable paints are manufactured into other products, including Processed Latex Pigment (PLP). PLP is an alternative raw material used in the manufacture of cement, and is made using Amazon’s patented processes.


Price
Amazon’s recycled content paint is priced significantly below what you would pay for a similar quality ‘virgin’ paint. It is a great value!


• Using recycled content paint saves resources, saves energy, reduces pollution, and reduces landfill waste.

• Amazon recycled paint is low VOC.

• Interior or Exterior Application

• Drywall, Wood, Stucco, Masonry

• Twelve Standard Colors Available in a Flat Finish

• Inquire about Custom Colors and Sheens for Large Orders



SOLVENT TYPE
Waterborne

RESIN TYPE
Acrylic copolymer

FINISHES
F Series (Flat): 10% max on an 85% meter.

COLOR
Stock: Whipped White, Ivory White, Tawny Beige,
Concrete Gray, Chocolate Brown plus Custom Colors.

VISCOSITY AT 70 F (25 C)
80-100 KU

MAXIMUM VOC CONTENT
250 g/L

SOLIDS BY VOLUME
30-40%

SOLIDS BY WEIGHT
40-55%

WEIGHT PER GALLON
10.0 lbs. Minimum

CLEAN UP
Warm, soapy water

AVERAGE DRY TIME 77 F (25 C)
To touch: 30-60 minutes
Recoat: 2-4 hours

APPLICATION EQUIPMENT
Brush, roller, airless spray

Green Seal Certified Product

+14137886900

jsegala@aol.com

http://www.amazonpaint.com/

3form Chroma

3form Chroma

3form Chroma offers unique aesthetics and performance for both horizontal surfaces and lighting applications. The product clarity offers designers the ability to create beautiful edge-lit and back-lit pieces. Available in thick-gauge formats, 3form Chroma is colored with 3form color infusion and 3form applied coating technologies to take color to new “sights”. 3form Chroma is produced from cast polymethyl methacrylate (PMMA) resin that offers excellent optical clarity. The material is available in thick-gauge formats that results in rigid panels suitable for many horizontal applications.

GREENGUARD Children & Schools Certified

GREENGUARD Indoor Air Quality Certified

Http://www.3-form.com

Contact:

charles.moore@3-form.com

3form, Inc. / Poured Glass

3form, Inc. / Poured Glass


Description:

With unbelievable depth and interlayers delicately and dimensionally preserved, 3form Poured Glass is a dramatic centerpiece. This decorative, architectural glass is a premium product, a memorable beauty to anchor your interior installation.

LEED Credits - Commerical Interiors

Construction Materials Waste Management (MR 2.1 & MR 2.2 - up to 2 points)

Credit Requirement

Develop and implement a construction waste management plan.

Recycle or salvage at least 50% (1 point) or 75% (2 points)

3form packaging is designed to be entirely recyclable, making it easy to divert construction waste from landfills

3form fabrication capabilities reduce the amount of materials needed on site.

3form Reclaim makes it easy to extend the life of panels, redirecting them from landfills.

Recycled Content (MR 4.1 & MR 4.2 - up to 2 points)

3form

3form Varia Ecoresin and 100 Percent both contain high levels of recycled content.

Some 3form Hardware contains recycled content.

Please see the recycled content category in the 3form LEED FACTS section below.

Low-Emitting Materials/ IAQ Compliant Products (EQ 4.1 - 1 point)

Credit Requirement

Adhesives and sealants used INSIDE the building seeking certification must not exceed LEED limits from Volatile Organic Compounds (VOC) content.

ALL adhesives and sealants used by 3form meet this LEED requirement.

Regional materials (MR 5.1 - up to 2 points)

Daylight and Views (EQ 8.1, EQ 8.2, EQ 8.3 - up to 3 points)

GREENGUARD Indoor Air Quality Certified

GREENGUARD Children & Schools Certified

Contact Manufacturer:

charles.moore@3-form.com

+18007260126

http://www.greenguard.org/ProductDetail.aspx?id=7702&t=0&b=1&a=16|0|0|0||||0|0|1|16|1

ANCO Products, Inc. / Textrafine™ Insulation

Description:

Anco Textrafine™ insulation is manufactured by a unique process where long, textile-type glass fibers are bonded together in random orientation by a stable thermosetting resin. This process produces unusually strong, resilient insulation that will return to full thickness following compression. Textrafine™ insulation is composed of 85% recycled pre-consumer fiberglass products.

Performance Data

• Does not cause corrosion of metals.
• Does not rot, mold, sustain growth of bacteria, vermin.
• Temperature: -325°F To 450°F, -198°C and 232°C.
• Fire Hazard Classification: U.L. 723 or ASTME84, Flame spread no greater than 25, smoke developed no greater than 50
• Available in density from .75 lbs. ft³ (12 kgm³) to 6.0 lbs. ft³ (96 kgm³)
• Available in 1/2" (13 mm) to 6" (152 mm) depending on density
• Various facing materials available on request.
• Keeps fiberglass waste usefull
• TextraFINE™ insulation can be easily cut and is easy-to-install.
• Compression packaging is available in a number of density thickness combinations providing significant transportation and storage efficiency.
• High tensile strength, resiliency, and ability to withstand high vibration environments.

GREENGUARD Indoor Air Quality Certified

Certification Status: Certified

GREENGUARD Children & Schools Certified

Certification Status: Certified
Restrictions: Includes Textrafine™ Insulation blankets

http://www.ancoproductsinc.com/insulation/textrafine.html
http://www.greenguard.org/ProductDetail.aspx?id=4030&t=0&b=5&a=0|0|0|0|LEED%20for%20Homes|||0|0|1|16|1

Contact Manufacturer:

mark.sorg@ancoproductsinc.us

Manufacturer Website:

Http://www.ancoproductsinc.com

• Anco Products Inc.
• 2500 South 17th St.
• Elkhart, Indiana 46517
• Phone: 574-293-5574 574-293-5574
• Fax: 574-295-6235
• Toll Free: 800-837-2626 800-837-2626

Planet Solace Drywall

The surface of the boards can be taped and jointed to provide a seamless finish to achieve a more traditional effect prior to decoration. Planet Drywall partitions offer simple and complete solutions to space division which can be complimented by using the Planet demountable systems, throughout both commercial and residential developments.

This material is composed of plasterboards screw fixed to a steel frame made up of lightweight studs and channels.

• Flexible design options
• Cost effective
• Suitable in any environment
• Clean line joint free finish

This systems offers simple and complete solutions to space division which can be complemented by using other Planet Interior products such as Glass Walling; Celings; Wall Storage and Furniture; Operable Walls; Glass Doors; FireScreens, enabling Planet to offer a full package interior solution from one Company.

Fully tested for sound, fire and impact performance criteria and is backed up by our quality installation service.

Tel: 01444 247933
0800 328 9561

Contacts:

http://www.planetpartitioning.co.uk/ContactUs/?id=1246

Planet Solace Drywall

National Gypsum Company / PermaBase Brand Cement Board

PermaBase^® BRAND Cement Board is a rigid substrate made of Portland cement, aggregate and glass mesh that provides an exceptionally hard, durable surface that is able to withstand prolonged exposure to moisture. PermaBase offers a competitive advantage over similar products on the market with its patented EdgeTech^® technology. The tapered, double-wrapped edge design allows for closer nail or screw application to the edge.

Applications

• PermaBase is ideally suited as an underlayment or backing surface for tub and shower surrounds, countertops, flooring and a variety of other interior and exterior applications.

Features & Benefits

• 30-Year Limited Warranty on PermaBase Interior Applications.
  Click here to view warranty
• 10-Year Limited Warranty on PermaBase Exterior Applications.
  Click here to view warranty
• Double-wrapped edge with EdgeTech technology allows for closer fastener application of nails or screws at the edge without crumbling or spinout.
• IRC and IBC 2006 Compliant - Meets ASTM C 1325.
• Resists the growth of mold and mildew achieving a panel score of 10, the highest possible, per ASTM D 3273.
• Highly moisture resistant, and will not rot, disintegrate or swell when exposed to water.
• Suitable for both interior and exterior applications.
• Impact resistant, extremely durable and dimensionally stable. It has excellent overall flexural, compressive, and tensile strength characteristics.
• Can be cut to size utilizing a standard utility knife and straight edge.

- exceptionally hard, durable

- withstand prolonged exposure to moisture

- Applications: tub and shower surrounds, countertops, flooring and a variety of other interior and exterior applications

GREENGUARD Certified
PermaBase Cement Board is GREENGUARD Children & Schools Certified® for indoor air quality.

Contact Manufacturer:

techservice@nationalgypsum.com

Permabrand Cement

Greenguard

Special-Lite / Special-Lite Aluminum Flush Doors 2

The SL-16 Aluminum Flush Door from Special-Lite provides an attractive, easy-care option for applications where reduced glass area is desired, but only moderate abuse is expected. It offers excellent design flexibility and an elegant, contemporary look.

Available in a variety of face sheet textures with Class 1 (0.7 mil) anodized colors or Kynar painted finishes, the SL-16’s corrosion-resistance makes it ideal for humid or corrosive environments such as water and wastewater treatment and industrial facilities.

A foamed-in-place urethane core provides improved durability and thermal performance, without creating unwanted VOC emissions.

It is also available with stainless steel face sheets (SL-16SS) for sanitary environments such as hospitals, laboratories, and kitchens, and in smaller sizes with closed top and bottom rails (SL-165) for bathroom and shower stall doors.


- Ease of maintenance and long life

- Attractive, proper for applications of less glass - Commercial and educational facilities

- Excellent design flexibility, contemporary look

- Resists high humidity or corrosive chemicals (ideal choice for industrial facilities)



Greenguard

Special-lite

Special-Lite / Special-Lite Framing Doors

Special-Lite Framing use custom fabricated 6063-T5 aluminum alloy with Class 1 (0.7 mil) anodizing or Kynar painted finishes that stay new-looking for years with only routine cleaning with environmentally-responsible cleaning products.

GREENGUARD Indoor Air Quality Certified Certification Status: Certified Certification Period(s): 9/2005 - 9/2010

GREENGUARD Children & Schools Certified Certification Status: Certified Certification Period(s): 1/2006 - 9/2010

Special-Lite

Greenguard

Tranquility Porcelain

Description

Tranquility, by Táo Cí, is a through-body, double loaded porcelain tile with a contemporary look.

Colors + Finishes

There are seven colors in the series. Each is available in four finishes (shown below).

Sizes

The three standard sizes are 12"x12", 12"x24" and 24"x24". All sizes are rectified, allowing for a tight 1/16" grout joint. Tile thickness is 3/8". In addition, all Tranquility colors are produced in four different mosaic patterns.

Applications

Tranquility is suitable for interior and exterior walls, as well as interior residential and heavy-traffic commercial floors.

Installation + Maintenance

Tiles can be installed using standard installation methods for thinset adhesives. Use high quality adhesive and grout from manufacturers such as Laticrete and Mapei, following manufacturers' recommendations, depending on conditions. Clean with a neutral detergent when needed.
Tao Ci Tranquility

Ceramica Fioranese

Description

Materie is a series of through-body, metallic-glazed porcelain tiles from Italian manufacturer, Ceramica Fioranese. There are four patterns in the series: Ramage, Rose, Cristalli and Lamé.

Colors + Finishes

Each pattern is offered in various colors and finishes. Please see the color selection below.

Sizes

Standard nominal (and actual) tile size is 16"x32" (15.75"x31.5"). Tile thickness is 3/8".

Applications

All of the products in the Materie series are highly durable and easy to maintain. They are suitable for interior walls and light to medium traffic commercial flooring applications.

Installation + Maintenance

Tiles can be installed using standard installation methods for thinset adhesives. Use high quality adhesive and grout from manufacturers such as Laticrete and Mapei, following manufacturers' recommendations, depending on conditions. Do not use acids or bases to clean Materie. Use mild detergents with a pH of 6.5 to 7.5 that can be used for ordinary maintenance. It is recommended that mats be placed at points of entry to remove sand and dirt particles from shoes to reduce scratching and wear. Due to the metallic surface of the tile, some light scratching and dulling may occur.

Ceramica Fioranesa