ABET LAMINATI / ABET High Pressure Laminate

ABET LAMINATI / ABET High Pressure Laminate

Metals are never recommended for horizontal surfaces where wear and traffic are an issue. In general, darker laminates show scratches more readily than lighter colors. Consider this when choosing a surface that experiences traffic.

Typical horizontal applications include work surfaces on counters, table tops, residential and commercial furniture, case goods, store fixtures, and work stations. Vertical applications include wall panels, cabinet walls, doors, toilet partitions, elevator cab interiors, front panels of workstations in hospitals, restaurants, retail stores, and airports. This grade also has the capability of
postforming to achieve radius edges for counters, desktops, and store fixtures.

Composition: ABET LAMINATI high pressure decorative laminate is manufactured by pressing melamine impregnated print and solid color surface sheets over a phenolic impregnated kraft paper core at pressures over 1000 psi and temperatures of approximately 300 degrees F (149 degrees C). The backs are sanded to facilitate bonding to a substrate.

Limitations: ABET LAMINATI high pressure decorative laminate is not recommended for exterior applications or for bonding to gypsum wallboard, plaster, concrete or plywood. This product is not a structural material and is to be used bonded to a suitable substrate. Do not use in areas with extreme humidity conditions or temperatures higher than 275 degrees F (135 degrees C) for extended periods of time. This product is not to be exposed to continuous, direct sunlight. Metalli laminates do not meet regular wear resistance requirements and should not be used in high wear areas.

High-pressure decorative laminates and substrates should be allowed to acclimate for at least 48 hours at
the same ambient conditions. Optimum conditions are approximately 23 degrees C (73 degrees F) and a
relative humidity of 45% to 55%.

Transport
· During handling operation, we recommend moving the panels with extreme care because sharp edges could scratch
the decoratives.

Finishes:
Sei A smooth textured finish with a moderate reflective value
Soft A smooth low sheen finish
Lucida A high gloss finish
Millerighe A horizontal line embossed finish
Millerighe-2 A horizontal line embossed finish
Fiber A fiber inclusion embossed finish
Mandarin A pebbled textured finish with moderate reflective value
Nutshell A woodgrain tick embossed pattern
Magma An embossed stone pattern
Muro An embossed pattern
Multirighe An embossed line pattern
Satinata A brushed metal pattern
Onda An embossed grooveMAINTENANCE AND CARE



Sheet Size: 51" (130 mm) x 120" (305 mm)
Thickness: 0.035" (0.9 mm)

ABET high pressure laminates have a hard, durable melamine surface and will maintain their attractive appearance longer than most other decorative surfacing materials and requires minimal maintenance. The decorative surface may be cleaned with warm water and a mild soap or detergent using a damp cloth or sponge. Difficult stains such as coffee or tea can be removed using a mild household cleaner/detergent and a soft bristle brush, repeating as necessary.
Do not use abrasive pads, scouring powders or cleansers as they may permanently dull or scratch the laminate surface making it susceptible to staining. Harsh chemicals such as oven cleaner, toilet cleaner, drain cleaner, and acids and alkalis chemicals will etch and discolor the decorative surfaced curve pattern.



Cost varies with quantity, pattern, finish and other factors.

usa@abetlaminati.com

+18002282238

http://www.abetlaminati.com/techData/pdf/New-ABET-LAMINATI-Technical-Data-Horizontal-Postforming-0.9mm-R-110.pdf

http://www.abetlaminati.com/ProductDetail.aspx?SKU=744METDECOR

http://www.greenguard.org/ProductDetail.aspx?id=6617&t=0&b=1&a=16|0|0|0||||0|0|1|16|1